ELEGOO Standard Resin 2.0 - 405nm Photopolymer 3D Printer Resin for DLP/LCD Printers (1000G, Grey) | High Precision, Smooth Finish | Ideal for Miniatures, Jewelry & Prototyping

Read more ELEGOO Standard Photopolymer Resin 2.0 for 3D Printers ELEGOO Standard Photopolymer Resin 2.0 Storage Method Please store the product in a dry, ventilated, non-corrosive room, and not in a sun or humid place. The resin has the best effect when stored at 25°-30° Product Parameters Hardness: 80-86D Maximum Force (KGF): 136.5±10% Tensile Strength (MPA): 33.21±10% Deformation at the Point of Maximum Force (mm): 5.70±10% Elongation at Yield Point (%): 6.18±10% Elongation at Break (%): 10.03±10% Tensile Modulus (MPA): 409.56±10% Maximum Bending Strength (MPa): 33.59±10% Flexural Modulus: 936.9±10% Read more Excellent Fluidity 405nm Rapid Resin can quickly infiltrate models and shorten the curing time with its excellent fluidity, which ensure the high precision and smoothness of the printed model. Meanwhile, it has strong hardness. High Precision Photopolymer resin has excellent stability during printing. With this printer resin, the model has high precision with smooth surface and clear detail. No deformation or noticeable shrinkage. Fast Curing Standard rapid resin is designed for 405nm LCD printers, which ensures the strength of the model without excessive shrinkage and shorten the curing time. Read more Precautions This product is for one-time use and cannot be reused. This material should not be in contact with eyes, skin or clothes, and should not be tasted or eaten. Use it only under good ventilation. Please pay attention to air circulation and take protective measures. Wash thoroughly after operation. The product is in a liquid state and has a slight odor. Please wear a mask when using it to avoid inhalation of aerosol and cause infection. The product should be stored in a sealed container. After use, it should be sealed in time and placed in a dry and well-ventilated place. It should not be exposed to the sun. If you accidentally touch the skin, wash your skin with soap and water or seek medical attention. If you accidentally touch your eyes, open your eyelids immediately, rinse with soapy water for about 20 minutes, and seek medical attention in time. If accidentally inhaled or swallowed, do not induce vomiting, keep resting, and send to the hospital for treatment in time. Disposal of waste in accordance with local environmental regulations and requirements.